You are here

Seal Systems

atlast3_small1 atlast4_small impact3_small slider3_small1

Flexiskirt Conveyor Sealing System

flexi2_smallFlexiskirt outperforms conventional conveyor skirtboard sealing systems.
Flexible skirt seal conforms to the ever-changing belt surface, creating a snug seal that eliminates spillage.

Conventional skirt seals allow material to escape through the gaps caused by belt sag. The Flexiskirt takes the conveyor’s dynamics into account, adapting to seal widening or narrowing gaps. The weight of the conveyed material helps create a snug seal that eliminates spillage.

Datasheet

At-Last-A-Seal Conveyor Sealing System

atlast_smallPrevents spillage in load areas by creating a “live seal” using the pressure of the material’s own weight.

At-Last-A-Seal Skirt Rubber Conveyor Belt Sealing System Spillage in load areas is a major problem in most facilities. The At-Last-A-Seal solves the problem by providing a “live seal” between the belt and the structure. The seal moves freely on the chute wall, letting itself adjust and needing little or no maintenance.
When the belt is loaded, material presses down on the inside slope of the At-Last-A-Seal, and this pressure creates the seal. As the belt load decreases and eventually empties, the pressure decreases so as not to wear the seal prematurely.

Datasheet

Talon Dust Seal

Datasheet