Gordon Saber Channel Mount (SCM)
Conveyor Belt Cleaner
Improved design makes this cleaner tougher, and blade
change-out is even easier.
The Saber Channel Mount cleaner has all the great features of
the Saber
Primary, with a reinforced blade and frame that allows it
to take even more abuse. Plus, the blade can be easily
replaced from either side of the conveyor, minimizing
downtime.
Gordon Saber Primary
Conveyor Belt Cleaner
Removes carryback at the head pulley, the most efficient
point.
Material carried back by your conveyor causes safety hazards,
accelerates the wear on all your conveyor components, and is
expensive to clean up. The patented Saber Blade and
Twister Tensioner will make carryback the least of your
worries.
Gordon Mini Saber Conveyor Belt Cleaner
Big performance from a little blade provides effective
cleaning for small head pulleys.
Cleaning small head pulleys can be very difficult and
sometimes virtually impossible. Most cleaners designed to work
at the head pulley are built for pulleys 24 inches (610 mm)
and larger. These cleaners either require more space to
install than you have available, or they will wear to an
unusable point long before the blade has reached the end of
its normal life.
The Mini Saber Primary Cleaner incorporates many of the
design features of the Saber Primary, just in a smaller
package, incorporating the Mini Twister Tensioner. When small
pulleys cause you big trouble, look to the Mini Saber to solve
your problems.
Saber Dual Primary Belt Cleaning System
Maximum belt cleaning with two primary cleaners on the head
pulley.
Many conveyors accumulate too much carryback for one
cleaner to remove. Most vendors will tell you that you must
use one primary cleaner on the head and one or more secondary
cleaners positioned farther down on the belt in an attempt to
get the material that remains on the belt after it passes
through the primary cleaner. Unfortunately, this carryback
material is then deposited under the conveyor and must be
dealt with manually, increasing cleanup cost.
The Saber Dual Primary positions two primary cleaners on the
head pulley. The upper blade cleans the center of the belt,
removing the bulk of the fines. The lower blade is standard
width and removes the remaining fines from the belt surface.
Compact mounting means that the Saber Dual Primary is
available to fit most pulley sizes. With the Saber Dual
Primary on your belt line, carryback will be a thing of the
past.
Espanol-Spanish
     |
